Replace Nissan Key Fob Batteries
If your Nissan key fob isn't responding to your commands, it's a sign that its battery is dying. Fortunately, this is an easy fix that most people can fix themselves.
To replace the battery, you can purchase an alternative one at a hardware store or refer to the owner's manual for the model you own.
Change the Battery
The key fob in your Nissan model has a built-in lithium battery that will eventually lose its charge. The key fob battery can be changed in just a few minutes. First, you'll need to purchase an additional CR2032 3V battery. This is a small coin cell battery that is commonly used in key fobs and is available at all convenience stores. You will also need a pair of gloves (latex or non-latex) and small screwdrivers with flat heads to open the fob. Consult your owner's guide for a detailed guideline and steps to follow before you begin.
When nissan key have the new battery, remove the old one by flipping the fob over and looking at the backside. There is a tiny catch that you have to release by pulling it downwards. This will take the mechanical key from its original position within the fob.
Next, insert the new battery, and make sure that it's positioned correctly. Close the fob after the battery has been installed and then click the two sides of the fob together. After completing this last step verify your key fob by pressing the unlock button, and then seeing what happens. If everything is in good in good order, you're now able to take advantage of the Nissan's numerous features. After changing the battery, it is a good idea to re-program your key fob to make sure that it's functioning properly.
Replace the Transmitter
With your key fob functioning as the "key" to many of your car's essential functions, it can be a serious blow if you misplace or damage it. And with a dead or damaged key fob, you'll find yourself without the ability to lock and start your car.
It's a great idea to keep a spare key fob around in the event of an emergency. Fortunately, the process of replacing your Nissan key fob is fairly simple. The procedure for replacing your Nissan key fob is simple. You will need an additional flathead screwdriver as well as the new battery to get rid of the old.
You'll need a round Panasonic CR 2032 3V battery (you can typically find them in multipacks at less than $5 USD). The battery is inside the back half of the key fob. You'll require a small flathead screwdriver in order to gently split the two halves. Utilize a flathead screwdriver and a small flathead to remove the clip that is on top of the battery. Make sure to note the place of placement. Replace the battery and put the key fob back together. Test it to ensure it works correctly.
Like any electronic device like yours, like all electronic devices, your Nissan Intelligent Key will eventually wear out from regular use and will require replaced. Secure your key fob from magnetic fields, water and physical impacts. Be careful not to drop it or put too much pressure on the device.
Replacing the Key
If your Nissan key fob is no longer working you won't be able to use it to unlock or start your car. This is a problem for people who have to travel to work in Detroit or run errands around Dearborn.
It's not hard to change the battery in your Nissan Smart Key. You can do it at home or at a dealership, and you'll typically get a battery for $5 or less at the hardware store.
Begin by flipping the fob on its side and pressing a small catch on the back. This will trigger the mechanical emergency key. While you won't be in a position to use the emergency key to start your car however, it will allow you to open the door.
Look for a small slit on the top of the casing. These are the perfect place to insert the screwdriver in it, allowing you to break the two parts of the key fob apart. Once you've gained access to the battery inside, pull it out and note of its location. When you are ready to reassemble your key fob, simply insert the new battery and snap the two parts of the case back together. Then insert the mechanical key and your Nissan smart key will be able to operate as usual.
Other Issues
Many modern vehicles are equipped with key fobs that let you to lock and open them without requiring the physical car key. To do this the key fob makes use of small transmitters to communicate with the car's computer system.
There are a variety of reasons for why your Nissan key fob does not work after you replace the battery. One possibility is that the new battery was not correctly fitted into the key fob. Another possibility is that the key fob requires to be reset. Fortunately, this is an easy task that can be completed at home using a few simple tools.
For example, you'll need the screwdriver, which should be preferably with a flat head, to open the key fob, and then remove the old battery. With a screwdriver, pry the back of the keyfob open and insert the new batteries. It is also necessary to reprogramme your key fob in order to make it compatible with your vehicle.
Fortunately, the majority of Nissan key fobs are programmed by the user, so you can easily accomplish this yourself. You can usually do this by inserting the key fob in the ignition twice in five seconds. If this doesn't work, you can take your key fob into a dealer or an auto locksmith to have it programmed. The cost will differ based on the person who you contact and the type of vehicle you own.